Call us on 03 8806 8356
Call us on 03 8806 8356
The NVT Model NV-ET1804 TBus PoE+ Transmitter is a compact bus-architected media converter that delivers 10/100 BaseT Ethernet and PoE+ power via coax, UTP or 2-Wire or Shielded Twisted Pair cable. These transmitters are extremely simple to use, with no IP or MAC addressing required. Status LEDs indicate power and link connectivity/quality/activity for RJ45 and TBus ports.
The NV-ET1804 TBus Ethernet Transmitter is backed by NVT Phybridge’s award winning customer support, Limited Lifetime Warranty and advance replacement.
*Distance and number of devices supported may lower due to limited power supply capacity and wire voltage-drop, or data-rate limiting due to the selected wire’s high-frequency signal attenuation. See manual or IP Distance Calculator.
| NV-BNC-8 Coax Jumper Cables (8) | Coax Jumper Cables 2ft pack of 8 each for all EoC product offerings. |
| NV-BNCA BNC to 2-Wire Adaptor | The NVT Model NV-BNCA is an adaptor used by NVT’s IP transceivers to convert from BNC to 2-wire. It ships standard with the NV-EC1701U transceivers, but can be used with TBus products as well. The NV-BNCA may be used mid-span along a wire run whenever conversion between coax and 2-wire cable is required. |
| NV-BNCT NV-BNC “T” Adaptor | The NVT Model NV-BNCT is a high quality “T” adaptor used by NVT’s IP transceivers to split 1701 or TBus data signals. It ships standard with the NV-EC1701-Kit2 and NV-EC1701-K2H kits. The NV-BNCT may be used at the head-end or mid-span for coax daisy-chain applications. |
| NV-DPSC4 Detachable Power Supply Cord Splitter 1:4 x 2ft. | Takes a single C20 EIA (male) connector and splits into four C13 EIA (female) outlet plugs. Allows for multiple EoC transceivers to be connected to a single plug. Cord length is 2ft. |
| NV-RMEC16-90 EoC Rack Mount Tray Kit for 55VDC, 60W or 110W Power Supplies | The NV-RMEC16-90 Rack Mount Tray allows for the rack mounting of up to four single NV-EC1701 EoC transceivers and their related 55VDC, 60W or 110W power supplies. The NV-RMEC16-90 can support up to (16) IP or Megapixel cameras. The NV-RMEC16-90 Rack Mount Tray can reside on the front or the rear rails in the same equipment rack as other rack mount equipment such as network switches. The steel tray panel is designed to withstand the mechanical load of multiple coax cables. All installation hardware is provided including 1:4 power cord splitter. |
| NV-RMEC16U-90 EoC Rack Mount Tray Kit for 55VDC, 60W or 110W Power Supplies | The NV-RMEC16U-90 Rack Mount Tray allows for the rack mounting of up to four single NV-EC1701 EoC transceivers and their related 55VDC, 60W or 110W power supplies. The NV-RMEC16U-90 can support up to (16) IP or Megapixel cameras. The NV-RMEC16U-90 Rack Mount Tray can reside on the front or the rear rails in the same equipment rack as other rack mount equipment such as network switches. The steel tray panel is designed to withstand the mechanical load of multiple coax cables. All installation hardware is provided including 1:4 power cord splitter. |
| NV-PS55-60W 55VDC 60 Watt Power Supply | The NVT Model NV-PS55-60W Power Supply delivers 55VDC at up to 60 watts to the NVEC1701, NV-EC1701U, and TBus products. |
| NV-PS55-110W 55VDC 110 Watt Power Supply | The NVT Model NV-PS55-110W Power Supply delivers 55VDC at up to 110 watts for use with the NV-EC1701, NV-EC1701U, NV-ET1801, NV-ET1804, and NV-ER1804 Ethernet transceivers. |
IP Wire Distance Calculator (Requires Excel)
