The Enable-IT™ 828 Gigabit PoE Extender Unit is the world’s 1st and only for 4 years running copper Gigabit PoE Extender Kit solution in the industry today.
This 828 product is a standalone unit to be used with your PoE Injector or PoE Midspan. The standalone 828 can drive incremental Gigabit Ethernet to 800ft (240m). For installing PoE IP cameras, PoE Access Points and remote LAN segments – Nothing is more cost effective or simple to install. The three LAN port design allows for a laptop to be connected and quickly configure devices.
The Enable-IT 828 can drive industry standard Gigabit Ethernet signals to over six times the restricted IEEE standard Ethernet distance when combined in a series of multiple units and uses high power PoE . This cost-effective solution eliminates many of the limitations and high costs for extending LAN cabling today.
The 828 Series Solution is a standalone powered Gigabit Ethernet Repeater that doubles the range of your Gigabit Ethernet to an unpowered remote location.This is ideal for installing high powered PoE cameras remotely using only a CAT5e or CAT6 rated 100m cabling. Selectable DIP switches allow for disabling PoE output on either output port to enable standard non PoE LAN devices such as a laptop to configure an IP camera.
You can also daisy chain (3) 828 PoE Extender Kit to reach 2,000ft (600m) to power a 56V 50W PoE device easily.
Power5V DC Self Powered from your PoE Input
Data Rate1000Mbps full-duplex Ethernet Data & PoE (802.3af) or PoE (802.3at)
InterfaceEthernet: (3) LAN RJ-45 Standard 10/100/1000BaseTX, MDI-X, Auto-negotiate ports)
DimensionsThick 1″ (25mm) Width 3.1″ (81mm) Length 4″ (110mm)
EnvironmentOperational Temperature: -49°F to 168°F (-45°to 76°C)
Humidity: 5% to 95%, non-condensing
EnclosureRuggedized metal wallmount casing with Triple Gigabit LAN Network ports