Call us on 03 8806 8356
The Enable-IT™ 865 PRO Gigabit PoE Extender kit is an ideal solution to install your IP surveillance cameras, WiFi access points, VoIP phones and other PoE devices where you need, not where you are limited to by false thinking LAN distance restrictions. It can operate up to 3,500ft / 1,066m from you power and data source and supports any PoE enabled WiFi Wireless Access Point, Security camera or other PoE powered equipment. This eliminates the need for your installers adding power supply outlets and associated AC power cabling, providing an affordable, safe and reliable power solution over your wiring or existing Ethernet infrastructure.
Using the provided High Powered 61W 56V Gigabit PoE Injector, a single (120V ~ 240V) IEC 320 C14 standard Country specific power cord input will deliver PoE power sufficient enough to deploy multiple 12V ~ 24V / 6W ~ 30W PoE devices anywhere you need to.
Keep in mind that all DC including (PoE) voltage drops over distance and thicker gauge wire will help this issue. As a rule of thumb you will lose up to 6V per every 200 feet of wiring, depending on the gauge. For example in Category 5 or 6 24 AWG there is less wire/copper to conduct electricity which is lower power strength at distance due to impedance. Lower power strength increases the amperage and that generates more heat in the wire. Depending on distance, you may need to use more pairs or wire or 18 gauge wiring as a dedicated DC power buss – like low voltage landscape wire and run Ethernet on a 1-pair 24 AWG. There are options to maximize your distance and PoE output when used in conjunction with our PoE Extenders or PoE DSLAM that can power a 56V 60W PoE IP PTZ Camera at 4,000 ft away.
This kit includes the following:
(2) EnableIT 865 PRO Gigabit PoE Extender Units
(2) 10′ Black Ethernet patch cords
(1) 12V-1A DC Country Specific (120-260V AC) Power Adapter 2.5mm DC jack
(1) Enable-IT 360 56V – 61W IEEE 802.3at Gigabit PoE+ Injector
(1) IEC 320 C14 (90 – 264V AC) Country Specific power cord for the 360 Injector
(1) Enable-IT 865 PRO Quickstart Guide
PowerCO unit – 12V-1A DC Country Specific (120-260V AC) Power Adapter 2.5mm DC jack included. Data Rate1,000Mbps full-duplex Ethernet Data InterfaceEthernet: (4) LAN RJ-45 Standard 10/100/1000 Base-TX autosensing ports | DimensionsHeight 1.4″ (35mm) Depth 3.4″ (86mm) Width 4.4″ (111mm) EnvironmentOperational Temperature: -49°F to 168°F (-45°to 76°C) EnclosureRuggedized wallmount black Aluminum casing Optimized for heat extraction and isolation without fans. |
Copyright © 2016-19 Uniqmac Technologies. All rights reserved.
Uniqmac Technologies
Unit 8, 126 Fairbank Road
Clayton South
VIC 3169
T: 03 8806 8356
F: 03 8555 0816
E: [email protected]