Call us on 03 8806 8356
The Enable-IT™ 828WP Outdoor IP68 Rated Waterproof Gigabit PoE Extension Solution is ideal for installing extended range PoE devices such as PoE VoIP phones, PoE WiFi Access Points, PoE IP cameras, PoE medical equipment, PoE security locks and much more. At time of ordering the 828WP can be configured to disable PoE output on either or both output ports to enable non PoE LAN devices. Default configuration is PoE output enabled on both ports. These are the world’s 1st and only Waterproof copper Gigabit PoE solution in the industry – from the Inventors of PoE Extender. This weatherproof solution comes with a high powered Enable-IT 360 56V 61W Gigabit PoE Injector. that powers the 828WP Gigabit PoE Extender and your PoE devices with 2-pair and 4-pair PoE power. The single PoE injector can even power up the 828WP and 3 other 828W units and your PoE device up to 2,000ft (600m) all from one 120 ~ 260V AC outlet – Nothing is more cost effective or simple to install.
The three LAN port design allows for deployment of two separate PoE devices. By default both output ports supply PoE power, however the unit can be configured at time of ordering for disabling PoE output on either or both output ports.
The Enable-IT 828WP Outdoor IP68 Rated Waterproof Gigabit PoE Extender is a very cost-effective solution eliminates many of the limitations and high costs for extending LAN cabling today. For Gigabit throughput make sure to leverage your existing or new CAT5e or better rated cabling
Both 2-pair and 4-pair PoE output is standard to support your high powered PoE Devices.
You can also daisy chain (4) 828W Outdoor IP68 Rated units to reach 2,000ft (600m) to power a PoE devices easily.
PowerEnable-IT 360 56V 61W Gigabit PoE Injector- 120 ~260v AC Input 56V DC 61W OutputEnable-IT 828WP uses PoE input Power and consumes less than 5v DC at startup and passes the rest through Data RateGigabit full-duplex Ethernet Data & PoE (802.3af) or PoE (802.3at)InterfaceEthernet: (3) LAN RJ-45 Standard 10/100/1000BaseTX, MDI-X, Auto-negotiate ports | DimensionsHeight 2.0″ (51mm) Depth 11.0″ (280mm) Width 4.5″ (114mm)EnvironmentOperational Temperature: -49°F to 168°F (-45°to 76°C)Humidity: 5% to 95%, non-condensing EnclosureRuggedized IP68 Rated mountable casing for durability. |
Copyright © 2016-19 Uniqmac Technologies. All rights reserved.
Uniqmac Technologies
Unit 6, 26 Rushdale Street
Knoxfield
Victoria 3180
T: 03 8806 8356
F: 03 8555 0816
E: [email protected]