Call us on 03 8806 8356
Call us on 03 8806 8356
Introducing: NVT CLEER Simple IP modernization
The award winning CLEER switch is the worlds first 24 port managed switch that delivers 100 Mbps Ethernet (full duplex) and PoE+ over Coax with 2,000 ft (609 m) reach.
No need for a costly and disruptive rip-and-replace of your infrastructure when you can transform your existing coax into a robust IP platform with the CLEER 24 switch or the EC 10 switch.
The NVT Phybridge EC Extender Solution is designed to supercharge the downlink ports of a standard Ethernet switch delivering 10/100Mbps symmetrical (full duplex) and PoE over Coax infrastructure with distances up to 4,000ft (1,220m). That’s 12X the reach of standard Ethernet switches, thus removing the costs and disruptions associated with multiple IDF closet requirements.
With the EC Extender Solution, IP IoT devices can be connected to the existing Coax cabling infrastructure, delivering optimal performance, while saving cost, time, and environmental e-waste. Furthermore, the cost savings realized by using EC Extender Solution can enable system designers to transfer budget and resources towards higher-quality, applications and IEEE-compliant IoT devices, including IP-enabled phones, cameras, access control, speakers, and even facilities lighting.
Extend the reach of standard PoE switches with the EC Extender Solution
EC Adapter Options
There are three media converter options available to pair with the EC-Base Extender and extend PoE over Coax. The EC-Link and EC Link+ are single endpoint solutions and the EC4 enables 4 IP endpoints from a single long Coax cable.
| EC-LINK | EC-LINK | EC4 | |
|---|---|---|---|
| Power |
|
|
|
| Casing | Plastic | Metal | Plastic |
| EN 50121-4 Certification | Yes (Approved to operate in a Railway/Subway environment) | ||
| Model Number | EC-Link |
| Part Number | NV-LNK-02 |
| Dimensions | 8.8cm x 3.2cm x 2.1cm (LxWxH); 3.46” x 1.23” x 0.83” (LxWxH) |
| Weight | 42g (1.48oz.) |
| Interface: Network Infrastructure side (CLEER) | 1 BNC port: Coax cable (RG59, RG6, RG11) |
| Interface: IEEE Side (IP Device) | 1 RJ45 port; device should be IEEE 802.3 af/at compliant |
| Power Supply | PoE from the CLEER / EC switch or local power from EC-Base, maximum 30W (over 2-pairs) |
| DC IN (Barrel Connector) | Optional (sold separately) 48V – 56VDC via an external AC/DC Power Adapter with phoenix connector (IEC Class II isolated only) NOTE 1: Local power supply used must have its output isolated from Earth potential. NOTE 2: If voltage of local power supply is lower than the power voltage provided from the PoE switch, then power on the PoE switch should be turned off. |
| Power Consumption | 0.9W |
| Operating Temperature | -58°F to +158°F (-50°C to +70°C) Tests conducted against international safety standard at maximum ambient temperatures of 50ºC |
| Mean Time Before Failure (MTBF) | 20+ years |
| Humidity | 10% to 95% (non-condensing) at 35° C |
| Model Number | EC-Link+ |
| Part Number | NV-ECLK-PLS |
| Dimensions | 10.09cm x 5.03cm x 2.57cm (LxWxH); 3.97” x 1.98” x 1.01” (LxWxH) |
| Weight | 108g (3.81oz.) |
| Interface: Network Infrastructure side (CLEER) | 1 BNC port: Coax cable (RG59, RG6, RG11) |
| Interface: IEEE Side (IP Device) | 1 RJ45 port; adapter is IEEE 802.3af/at compliant and will negotiate power requirements with IP end device. |
| Power Supply | Maximum 50W (If locally powered and 30W if power provided from switch) delivered on 4 pairs. |
| DC IN (Barrel Connector) | Optional (sold separately) 48V – 56VDC via an external AC/DC Power Adapter (IEC Class II isolated only) NOTE 1: Local power supply used must have its output isolated from Earth potential. NOTE 2: If voltage of local power supply is lower than the power voltage provided from the PoE switch, then power on the PoE switch should be turned off. |
| Power Consumption | 1.1W |
| Operating Temperature | -58°F to +158°F (-50°C to +70°C) Tests conducted against international safety standard at maximum ambient temperatures of 60ºC at 30W and 55ºC at 50W |
| Mean Time Before Failure (MTBF) | 20+ years |
| Humidity | 10% to 95% (non-condensing) at 35° C |
| Model Number | EC4 |
| Part Number | NV-EC-04 |
| Dimensions | 11cm x 7cm x 2.5cm (LxWxH); 4.3” x 2.75” x 0.98” (LxWxH) |
| Weight | 96g (3.38oz.) |
| Interface: Network Infrastructure side (CLEER) | 1 BNC port: Coax cable (RG59, RG6, RG11) |
| Interface: IEEE Side (IP Device) | 4 RJ45 ports: device must be IEEE 802.3 af/at compliant, 10/100Mbps connection to IP end device |
| Power Supply | PoE from the CLEER / EC switch, or external power supply; maximum 50W (over 4-pairs) each port |
| DC IN (Barrel Connector) | Optional (sold separately) 48V – 56VDC via an external AC/DC Power Adapter (IEC Class II isolated only) NOTE 1: Local power supply used must have its output isolated from Earth potential. NOTE 2: If voltage of local power supply is lower than the power voltage provided from the PoE switch, then power on the PoE switch should be turned off. |
| Power Consumption | 1W |
| Operating Temperature | -58°F to +158°F (-50°C to +70°C) Tests conducted against international safety standard at maximum ambient temperatures of 50ºC |
| Mean Time Before Failure (MTBF) | 20+ years |
| Humidity | 10% to 95% (non-condensing) at 35° C |
| Model | EC-Base |
| Part Number | NV-ECLK-BSE |
| Dimensions | 10.09cm x 5.03cm x 2.57cm (LxWxH); 3.97” x 1.98” x 1.01” (LxWxH) |
| Weight | 108g (3.81oz.) |
| Interface: Network Infrastructure side (CLEER) | (For General/PoE Switch) 1 RJ45 port: supports negotiation with IEEE 802.3 af/at switches |
| Interface: IEEE Side (IP Device) | 1 BNC port: coax cable – RG59, RG6, RG11 |
| Power Supply | PoE from standard PoE switch, or external power supply; maximum 50W if locally powered. |
| DC IN (Barrel Connector) | Optional (sold separately) 48V – 56VDC via an external AC/DC Power Adapter (IEC Class II isolated only) NOTE 1: Local power supply used must have its output isolated from Earth potential. NOTE 2: If voltage of local power supply is lower than the power voltage provided from the PoE switch, then power on the PoE switch should be turned off. |
| Power Consumption | 1W |
| Operating Temperature | -58°F to +158°F (-50°C to +70°C) Tests conducted against international safety standard at maximum ambient temperatures of 60ºC at 30W and 55ºC at 50W |
| Mean Time Before Failure (MTBF) | 20+ years |
| Humidity | 10% to 95% (non-condensing) at 35° C |
| NV-PS55-60W | The 55VDC 60W optional power supply to locally power the EC4 adapter. |
| NV-PS55-110W | The 55VDC 110W optional power supply to locally power the EC4 adapter. |
| NV-PS55-48W-P | The 48VDC 48 watt optional power supply to locally power the EC-Link adapter. |
EC-EXTENDER KITS
Each EC Extender Kit is conveniently packaged and includes an EC-Link+ or EC4 Adapter, an EC-Base Extender, and an external power supply.
1-Port EC Extender Kit- NV-ECLK-PLS-XKIT
4- Port EC Extender Kit-NV-EC-04-XKIT
EC-Link
EC-Link+
EC4