Call us on  03 8806 8356

Home » Products » Enable-IT Ethernet Extension Experts » 865Q PRO PTZ IP Camera PoE Extender

865Q PRO PTZ IP Camera PoE Extender

The Enable-IT™ 865 Q PRO Axis Q Series PoE IP Camera Extender is the world’s only available solution to Extended Network and High Power PoE in a complete solution that exceeds the IEEE distance limitations for all Ethernet equipment and 802.3at PoE . The 865 Q PRO enables the simple installation of a high powered PoE device up to 1,500ft (458m) from your LAN and Power Source. This is ideal for installing PoE IP Security cameras or PoE WiFi Access Points.

These extenders drive the reach of high power PoE and Ethernet to more than (4.5) four and a half times the typical Ethernet distance limit of 328ft, up to 1,500ft (458m) distance. There is no substitute for our Expertise – Only Enable-IT 865 Q solution can. Made in the USA with quality and pride – the only manufacturer to do so in this industry.

To increase the durability and extended use of the product providing maximum future technology protection, 865 Q PRO Extended PoE and Ethernet Units have been designed to meet the challenge of modern switched LANs and allows you to add features and capacity as your network expands. The 865 units have been tested to provide full duplex transport up to 100MB/s over CAT3 cabling or better. These unit also support the use of standalone PoE injectors natively. 

  • Extended Ethernet with Power over Ethernet(PoE ) on 4 pair existing
    Telephone wiring or Category rated wiring.
  • IEEE 802.3at PoE is delivered on pins 1/2/4/5 – positive power and on pins 3/6/7/8 – negative power
  • Optimized for Axis Q Series PTZ cameras
  • Rapid LAN style installation RJ45 jacks – no programming required.
  • High Power PoE PTZ Camera support
  • Network Equipment independence – Transparent to protocols, applications and MAC addresses.
  • Sustained 100Mbps full-duplex service delivery end to end.


CO unit
– 5v/2A DC country specific AC switching wall adapter included. (120-260VAC)

CPE unit
– remote self powered uses 5v and passes remaining PoE budget to end PoE device

Data Rate

100Mbps full-duplex Ethernet Data


Ethernet: (4) LAN RJ-45 Standard 10/100 Base-TX autosensing ports
Interlink: RJ-45 (1-Pair)


Height 1.5″ (38mm) Depth 3.75″ (95 mm) Width 5.75″ (146mm)


Operational Temperature: -49°F to 168°F (-45°to 76°C)
Humidity: 5% to 95%, non-condensing


Square wallmount plastic casing with Telco / Network port runs 25% cooler than any metal casing competitor