Call us on  03 8806 8356

Home » Products » QSAN Technology » XCubeSAN XS1216

XCubeSAN XS1216

XCubeSAN

XS1216

CPU

Intel® Dual-Core Processor

RAM

4GB DDR4 ECC DIMM (Max 32GB)

High Availability

Fully Redundant Modular Design

Built-in High Speed

Benefits of 10Gb Ethernet Network

Easy File Access with Quick Connection

XFinder

XFinder is a desktop utility that searches for QSAN XCubeSAN devices in the local area network.

Liquid Crystal Monitor

Portable USB LCM (LCD Module) can help you identify the management port IP address.

The Most Cost-Effective SAN Storage Solution

Snapshot (QSnap)

Practical and straightforward time machine.

Local Volume Clone (QClone)

Make one copy, get more protection.

Remote Replication (QReplica)

Prevents primary site failure.

Modular Design

Fully Redundant Modular Design

 

The XCubeSAN series is a proven high-availability SAN storage system. All of the critical components in the XCubeSAN series are hotly pluggable and designed with full redundancy. Additionally, dual-active controller design and automatic failover/failback mechanism and cache mirroring through NTB (Non-Transparent Bridge) bus to achieve Active-Active HA functionality allow the XCubeSAN series to withstand multiple component failures and make 99.999% availability.

High-Speed Network

Built-in High-Speed 10GbE LAN Ports

The Dual-Active controller SAN system has four 10GBASE-T iSCSI ports reaching 40Gb/s bandwidth when you aggregate all ports together. This base unit SAN system comes ready to support a variety of applications including data sharing, backup, video editing, and native virtualization support for VMware®, Citrix®, and Hyper-V.

Cache-to-Flash

Reliable and Advanced Protection Mechanism

In the event of power loss, the I/O cache data stored in volatile memory will be lost. Cache-to-Flash memory protection function that will safely transfer the memory cache data to a non-volatile flash device for permanent preservation.

1. Enclosure Power Button / LED
2. UID (Unique Identifier) Button / LED
3. Enclosure Access LED
4. Enclosure Status LED
5. USB Port
6. Disk Drive Power LED
7. Disk Drive Status LED

8. Power Supply Unit – PSU Indicator and Beep Off Button
9. Controller Status LED
10. Master / Slave LED (only for dual controllers)
11. Dirty Cache LED
12. UID (Unique Identifier) LED
13. Host Card Slot 1 (host card is an optional part)
14. Host Card Slot 2 (host card is an optional part)

15. Buzzer Mute Button
16. Reset to Factory Default Button
17. Management Port
18. Console Port
19. Service Port
20. USB Port
21. 10GbE iSCSI Port
22. 12Gb/s SAS Wide Port

Hardware Specifications

ArchitectureDual (Active-Active)
Storage OSSANOS 4
CPU
ProcessorIntel®
CPU Architecture64-bit
CPU FrequencyDual-Core
Memory
System Flash
Memory Module Pre-installed4GB DDR4 ECC DIMM
Total Memory Slots2
Memory Expandable up to32GB
NotesPer Controller
Storage
Drive Bays

3.5″ Slot x 16

Maximum Drive Bays with Expansion Unit616
Compatible Drive Type

3.5″ SAS HDD / SAS SED HDD

3.5″ NL-SAS HDD / NL-SAS SED HDD

2.5″ SAS SSD / SAS SED SSD

2.5″ SATA SSD / SATA SED SSD (*)

2.5″ SAS HDD / SAS SED HDD

2.5″ NL-SAS HDD / NL-SAS SED HDD

Drive Interface

SAS 12Gb/s

Maximum Internal Raw Capacity224TB
Maximum Raw Capacity with Expansion Units8,624TB
Hot Swappable Drive ✓
Notes
  • For more information, please refer to compatibility matrix and hardware manual
  • Maximum Internal Raw Capacity = 14TB drive x 16
  • Capacity may vary by RAID types
  • Up to 10 expansion units using XD5300 series 12Gb/s SAS expansion enclosure
  • 6Gb MUX board needed for 2.5″ SATA drives in dual controller system
External Port
USB 2.0 Port1 (Front)
USB 3.0 Port
HDMI Port
OthersUPS Port x 1
Console Port x 1
Notes
Connectivity Port
1GbE RJ45 LAN Port1 (Onboard Management Port)
10GbE RJ45 LAN Port2 (Onboard)
2 iSCSI (Option: HQ-10G2T)
10GbE SFP+ LAN Port4 iSCSI (Option: HQ-10G4S2)
Thunderbolt 3
16Gb SFP+ Fibre Channel4 (Option: HQ-16F4S2)
2 (Option: HQ-16F2S2)
Notes

For more information, please refer to accessory book

Please refer to the section below for expansion slot specification

Expansion Port
12Gb/s SAS Wide Port2 (Onboard)
Notes
PCIe Expansion
Gen3x8 Slot
Gen3x4 Slot
Notes
Host Card Expansion
Gen3x8 Slot1
Gen2x4 Slot1
NotesGen2x4 slot provides 20Gb bandwidth
Appearance
Dimension (H x W x D) (mm)130.4 x 438 x 515
Chassis Form Factor19″ Rackmount 3U 16 Bay
Net Weight (kg)21.7
Gross Weight (kg)24
Notes
Memory Protection
Cache-to-Flash Module ✓
Battery Backup Module + Flash Module ✓
Notes
Others
System Fan4 pcs
Replaceable System Fan ✓
Power Recovery ✓
Scheduled Power On/Off
Wake on LAN/WAN ✓
Power Supply Unit / Adapter770W/850W x 2 (80 PLUS Platinum)
Redundant Power Supply ✓
AC Input Power Voltage100V-240V
Power Frequency50-60 Hz, Single Phase
Power Consumption534W
British Thermal Unit1,822BTU
LCM Support ✓
Notes
Environment Temperature
Operating Temperature0°C to 40°C
Storage Temperature-10°C to 50°C
Operating Relative Humidity20% to 80% non-condensing
Non-operating Relative Humidity10% to 90%
Notes
Certification
Certifications

CE

FCC

BSMI

VCCI

KCC

Notes
Warranty
Standard Warranty3 years
Battery backup module / Super capacitor module : 1 year
Notes